MICROSCOPE COMPONENTS
LIGHT INTENSITY CONTROL
The intensity of the top (incident light) LEDs or bottom (transmitted light) LED can be adjust-
ed to the preferred brightness (0 through 10) by using the dimmer control located on the side
of the base.
ILLUMINATOR ON/OFF SWITCHES
A tri-illumination system is incorporated into the stand. The illumination system is controlled
by top (incident light) and bottom (transmitted light) on/off switches located at the base of
the stand. The incident illuminator is used for opaque specimens, while the transmitted
illuminator effectively illuminates the internal structure of transparent specimens. Translucent
specimens may be seen in greater detail if both illuminators are used simultaneously.
MAGNIFICATION KNOB
Used to change the SILVER30 series magnification settings.
STAGE PLATE
Frosted glass, black and white stage plates are provided with the microscope stand. The
frosted glass stage plate allows light from the bottom illuminator to pass through. The black and
white stage plates can be used for additional contrast to the specimen that is being viewed.
STAND
Used to support the stereo microscope head. The height is adjustable which allows the head
to change its focusing range. The stand also contains the top and bottom Illuminators.
TOP ANGLED ILLUMINATOR
The top 50mW LED light source is fixed at a 45˚ angle.
TOP TURRET ILLUMINATOR
The top 6 x 60mW LED light source is fixed in a downward in a vertical position to provide
maximum illumination of the specimen.
TURRET
The round barrel that houses the objective lenses. The SILVER30 Series has magnifications
that can be changed by rotating the black turret magnification knob to a different set of
objective lenses.
SILVER30
SERIES
| 04
SILVER
LINE