Mother's Choice serenity 017340, Instruction Manual

Page: 26 / 36

• vv
v
2
PUSH
DOWN
PULL
OUT
SLACK
CLICK
quick start guide
Rearward-facing installation:
newborn up to 12 approximately
POSITION 4
• vvv
2
PUSH
DOWN
PULL
OUT
SLACK
CLICK
quick start guide
Rearward-facing installation:
newborn up to 12 approximately
POSITION 4
• vvv
3
PUSH
DOWN
SASH
LAP
PULL
OUT
SLACK
CLICK
SELECT
RECLINE
1, 2, 3
quick start guide
Forward-facing installation:
12 months up to 4 years (approximately)
• vv
v
2
PUSH
DOWN
PULL
OUT
SLACK
CLICK
quick start guide
Rearward-facing installation:
newborn up to 12 approximately
POSITION 4
• vvv
26
To be used only in a forward-facing position by a child
whose shoulders are above the lower shoulder height
marker (approximately 6 months of age) until the child’s
shoulders reach the upper shoulder height marker
(approximately 8 years of age).
To be used with a lap-sash seatbelt by a child whose
shoulders are above the lower shoulder height marker
(approximately 4 years of age) until the child’s shoulders
reach the upper shoulder height marker (approximately
6 to 8 years of age). Can also be used with child harness
that is approved for use with this booster seat.
Option 1: HARNESSED FORWARD-FACING CAR SEAT
Option 2: BOOSTER SEAT
Option 3: LARGER BOOSTER SEAT
convertible car seat
the next seat for your child
for more information, visit:
www.motherschoice.com.au
To be used with a lap-sash seatbelt by a child whose
shoulders are above the lower shoulder height marker
(approximately 4 years of age) until the child’s shoulders
reach the upper shoulder height marker (approximately
8 to 10 years of age). Can also be used with child harness
that is approved for use with this booster seat.
• vvv
27
CLEANING BUCKLE
Follow the manufacturer’s instructions at all times.
Before removal, ensure you have carefully noted
the way which the various parts are attached to
the seat so as to facilitate reassembly.
Your child car seat is equipped with a buckle
designed to give your child maximum protection
during proper use (
Figure 1). When working
properly, your buckle should always fasten with
an audible ‘
CLICK’.
If sticky liquids (such as baby food, fruit juice, etc.)
get into the buckle it may become sluggish and
you will not hear a ‘
CLICK’.
REMOVING BUCKLE:
1.
Set seat in position 4 (full recline) (Figure 1a).
2.
Lay seat on its back to access crotch
adjustment (
Figure 1b).
3.
Using a flat object (such as a flat-head screw-
driver, not included) gently lift one end of the
Metal Plate to loosen (Figure 1c), repeat on
the other side.
4.
Push the metal plates through the top opening
to release crotch buckle for cleaning
(
Figure 1d).
1
1c
1d
1b
1a
convertible car seat
care and maintenance
• vvv
27
CLEANING BUCKLE
Follow the manufacturer’s instructions at all times.
Before removal, ensure you have carefully noted
the way which the various parts are attached to
the seat so as to facilitate reassembly.
Your child car seat is equipped with a buckle
designed to give your child maximum protection
during proper use (
Figure 1). When working
properly, your buckle should always fasten with
an audible ‘
CLICK’.
If sticky liquids (such as baby food, fruit juice, etc.)
get into the buckle it may become sluggish and
you will not hear a ‘
CLICK’.
REMOVING BUCKLE:
1.
Set seat in position 4 (full recline) (Figure 1a).
2.
Lay seat on its back to access crotch
adjustment (
Figure 1b).
3.
Using a flat object (such as a flat-head screw-
driver, not included) gently lift one end of the
Metal Plate to loosen (Figure 1c), repeat on
the other side.
4.
Push the metal plates through the top opening
to release crotch buckle for cleaning
(
Figure 1d).
1
1c
1d
1b
1a
convertible car seat
care and maintenance