www.moteck.com
4
Only qualified personnel are allowed to carry out the mechanical and elec-
trical installation of this product. Qualified personnel should be familiar with
the mechanical or electrical installation work and have corresponding work
qualifications.
Please read this manual before installing or operating the actuators.
Do not perform mechanical installation when the actuator is powered. Com-
plete the mechanical installation first, and then perform the electrical instal-
lation.
Do not hold the extension tube when the device is powered on.
Installers and operators must wear personal safety protection according to
the site conditions. And before starting to control the action of the actuator,
it must be noted that the actuator and its connected mechanical moving
parts are not blocked by other objects, and no one enters the dangerous
area.
Strictly follow the information in this manual and the product label of the
actuators, and do not exceed the performance limits of the specification.
Never disconnect any wires or connectors during operation or when power
is applied.
If you find the actuator any malfunction or damage, please stop using it
immediately and notify qualified personnel to take corrective measures.
Do not disassemble the actuator. Otherwise, the sealing and function of the
actuator will be damaged.
There may be grease on the extension tube. It is harmless to touch the
grease, and the grease should not be removed.
●
●
●
●
●
●
●
●
●
●
2. Important Information