[BUTTON-UP]
and
[BUTTON-DOWN]
simultaneously to reset the
frequency to 1Hz. The icon displayed is F.
In pitch-tracking mode the frequency can be offset from
-40.96 semitones to + 40.96 semitones in steps of 2 cents.
Press
[BUTTON-UP]
and
[BUTTON-DOWN]
simultaneously to re-
set to 0. The icon displayed is N or P.
Settings below the minimums stated above cause the LFO
to synchronise to the clock source (note that you must use
the [ROTARY ENCODER] to enter this mode). See section
for details on the clock source. When set to synchro-
nise to the clock the display will show a metronome indica-
tor and the LFO period value (down to as fast as 32 triplet).
The icon displayed is S in this mode.
Modulation level
To control the level of LFOx on the parameter page desti-
nation press
[BUTTON-LEVEL]
for global LFO-X . Press
[BUTTON-
UP]
and
[BUTTON-DOWN]
simultaneously to reset the level to
zero.
[TIP] Use a negative modulation amount to
have an inverted modulation waveform.
Global LFO options
With an LFOx parameter active (i.e. from either
[BUTTON-
LFO WAVFORM]
,
[BUTTON-FREQUENCY]
or
[BUTTON-LEVEL]
) press
[BUTTON-LEFT]
or
[BUTTON-RIGHT]
to access further options.
Use
[BUTTON-UP]
and
[BUTTON-DOWN]
to choose which LFO
option to edit and the [ROTARY ENCODER] to change the
values. There are 4 options:
Choice of global LFO 1–4
Choose from one of the 4 global LFOs to assign to this pa-
rameter page: GLOBAL1, GLOBAL2 ,GLOBAL3 or GLOBAL4.
LFO single-shot
OFF the LFO runs continuously.
S
ON the LFO will do one cycle of oscillation
(however this is only active when the LFO is
also set to a sync. mode, see below).
LFO sync/reset options
OFF the LFO is not reset on note-on
or gate signals.
EG-TRIG
FIRST NOTE the LFO resets on the
first
note-on or gate signal.
LFO-RESET
ALL NOTES the LFO resets on
all
note-on or gate signals.
LFO pitch track options
F/S
OFF LFO frequency does not track pitch.
N
NOTE LFO frequency will track the last played note
including pitch bend and global tuning and offset.
P
PITCH LFO frequency will track as per NOTE
and also track the
[BUTTON-MASTER PITCH]
page.
Press
[BUTTON-UP]
and
[BUTTON-DOWN]
simultaneously to al-
ways jump to the first option.
Press
[BUTTON-LEFT]
or
[BUTTON-RIGHT]
again , or press
[BUTTON-
LEFT]
and
[BUTTON-RIGHT]
simultaneously to return to the
main parameter page display.
[TIP] Try applying the 3-STEP or 4-
STEP stepped waves to modulate the oscillator
pitch and the oscillator will play an arpeggio where
the notes heard depend on the level control. Try
levels of 5, 7 or 9 semitones. Use a positive level
to play ’up’ and negative level to play ’down’.
User Guide v1.31 [FOR SCREENREADERS]
page 17
Summary of Contents for Motas-6
Page 2: ......
