TIG Inverter PONTIG 3200 DC MOST
-5-
User manual
Version 1.1 of 22.01.2018 EN
ATTENTION!
The following user manual should be read prior to installing and starting
the device. OSH manual should be known to every welder and
employee responsible for equipment maintenance.
PRELIMINARY COMMENTS
Commissioning and operation are possible only after reading following
manual carefully . Semi-automatic welding requires meeting the
requirements for electric arc welding regulations and complying with fire
regulations.
The operator of a welding device should be supplied with protective
clothing and equipment in accordance with valid regulations. It is
necessary to use a set of personal protective equipment in accordance
with the provisions of the Council Directive 89/686/EEC.
Personal protective equipment includes: welding mask, welding gloves,
welding clothes, leather shoes. Despite the high technical standard of the
device, the personnel should represent considerable discipline as regards
health and safety requirements to protect themselves against harmful
and health hazardous factors developed from welding technology.
OPERATING CONDITIONS
This device can operate under severe conditions. It is, however, important
to apply simple preventive measures to ensure long life and reliable work,
among others:
−
do not place or use this device on an inclined surface (of more than
15º),
−
do not use the device for pipe defrosting,
−
the device needs to be located in a place with free air circulation (to
and from the fan without obstacles). When connected to electrical network
the device must not be covered (with, for example, paper or cloth).
−
minimize the amount of dirt and dust that can get into the device,
−
device has an IP23S housing protection rating, keep it dry and not
locate on wet surfaces or in a puddle.
−
do not use the device for welding tanks previously used for flammable
substances storing.
ENVIRONMENTAL CONDITIONS
Range of air temperatures at:
−
work from -10ºC to +40ºC
−
storage and transportation from -25ºC to +55ºC
