Operation Manual
rev. 1.0 of 19.11.2018
-8-
MasterCut 120 CNC MOST
Plasma Cutter
Location of plasma cutter
Observe the following rules:
•
ensure easy access to connections, wires and switches.
•
do not place the cutter in small, confined spaces.
•
do not place the cutter on surfaces with an inclination greater than 15 degrees.
Device installation:
•
connection or repair of the device may only be carried out by trained personnel,
•
connection of several cutters (in series or in parallel) is forbidden,
•
before removing the covers of the device, always disconnect the charger from the power supply,
•
periodically carry out the necessary cleaning and maintenance,
•
ensure that power and ground are sufficient and adequate.
•
before cutting starts, check the condition of the cables and repair or replace them
•
in case of damage.
•
make sure to use correct spare parts for your plasma torch,
4. Technical data and accessories
Technical parameters
Unit
Electrical power supply
[V/Hz]
3x400/50-60
Network security
[A]
32 A
Max current I
1
[A]
34,7
Max effective current I
1eff
[A]
27,8
Idling gear voltage U
0
[V]
380
Cutting current (DC=100%) 1
2
[A]
100
Cutting current (DC=60%li) 1
2
[A]
120
Cutting current (DC=60%) 1.1
0
[A]
120
Maximum thickness of qualitative cutting for black
steel
[mm]
20
Air work pressure
[bar]
5,5
Max air pressure
[bar]
8,5
Air consumption
[l/min]
295
Arc ignition
pneumatic-contact
Current adjustment
steeples
Housing protection class
IP23S
Class according to standard EN 60974-1; -10
Class A
Dimensions (H x W x L)
[mm]
240x440x675
Weight
[kg]
32,4
Table 1: MasterCut 120 CNC MOST. Technical parameters
