Operation Manual
rev. 1.0 of 19.11.2018
-4-
MasterCut 120 CNC MOST
Plasma Cutter
Operator’s skin is exposed to a risk of contact with plasma arc radiation and aggressive
substances. Wear suitable protective clothing. Pay attention to the protection of bystan
-
ders against UV radiation emitted by the plasma arc. During the cutting process, harmful
gases and fumes are generated. Use respiratory protection. Noise generated during cut
-
ting may damage your hearing. Use personal hearing protection.
Persons with a pacemaker are not allowed to work with this device.
Danger of burns. Never touch the materials while cutting or shortly after finishing witho
-
ut protective (welding) gloves. Avoid skin contact with particles floating in the air. Do not
direct the plasma torch against other persons.
Keep a fire extinguisher close to the cutting location. After finishing cutting check work
station against fire hazard.
Do not cut without proper eye protection. Pay attention for providing safety for bystan
-
ders against welding radiation. Applied eye protection should have minimum 10 DIN safe
-
ty glasses. Do not direct the plasma torch against faces of other persons.
Electromagnetic interference
The device may influence other devices sensitive to electro-magnetic interference (ro
-
bots, computers, etc.) Always ensure that the devices within the cutting work station are
resistant to interference. For the purpose of limiting interference, it is recommended to
use cables as possible and arranged in parallel. Always work in a distance at least 100 m
from other sensitive devices. Always make sure that the installation is grounded. In case
of interference issues with other devices, properly shield the cables oruse appropriate
filters.
