Installation Instructions
Part # 910-891
-6-
Modified 01/17
6) Remove the two 10mm nuts securing the hard line
bolted across the firewall. Pull the line and brackets
off of the mounting studs so that it can move freely.
Figure 6.
Figure 6
7) Locate the two covers found at the rear edges of the
wiper cowl. Use a small screwdriver or pick to lift up
the covers by prying up and toward the inside of the
cover. Be gentle to avoid damage to the soft plastic
of the cowl and screw covers. Figure 7.
Figure 7
8) Use an 8mm socket and ratchet to remove the
screws found under each cover. Figure 8.
Figure 8
