The Solar Family Series Inverter
20
Connectors provide IP68 protection but should not be continually exposed to water (e.g. immersed
under water) and not placed directly on the top side.
Connecting to PV panel (DC input):
Figure 16
1. Wire stripping 7mm
2. Insert the wire into the core with pliers pressure;
3. The core penetration into the terminal internal until clamping, then tighten the nut
The Solar Family Series Inverter
21
Figure 17
Connecting to the grid:
1.
Measure grid voltage and frequency to see whether they are normal.
2.Open the breaker or fuse between inverter and utility grid.
3.Connect AC wires of inverter as follows:
