ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
hu
sl
ro
bg
ru
uk
el
ar
13
· Hygienic spray and blade set oil are available
from your dealer or our service centre.
· Oil and cleaning indicator
The appliance should be cleaned and oiled regu-
larly to guarantee a longer service life. To give you
advance notice of an urgent need for maintenance
care, the appliance has been equipped with an oil
and cleaning indicator. When the oil and clean-
ing indicator (D) lights up, the blade set urgently
needs to be serviced and oiled to prevent prema-
ture wear to the appliance.
f
Remove the attachment comb (Fig. 6
ⓑ
) and lift the blade
set out of the housing (Fig. 7
ⓐ
). Use the cleaning brush
to remove any cut hairs from the housing opening and
from the blade set (Fig. 8). The cleaning lever can also be
pressed. This allows the cut hairs that accumulate between
the bottom blade and the top blade to be easily removed
using the cleaning brush (EASY CLEANING).
f
Wipe the appliance with a soft, slightly damp cloth only.
f
Clean the blade set regularly using the hygienic spray.
f
Oil the blade set with the blade set oil (Fig. 9).
f
For a good and long-lasting cutting performance, it
is important to oil the blade set frequently.
f
If the cutting performance deteriorates after long
use despite regular cleaning and oiling, the blade
set should be replaced.
Changing the blade set
Warning! Injuries and material damage due to
incorrect handling.
f
Switch the appliance off and disconnect from the
power supply before changing the blade set.
1. Switch the appliance off using the on/off switch (Fig. 3) and
disconnect from the power supply.
2. Slide the blade set off the housing in the direction of the
arrow (Fig. 7
ⓐ
). Remove the blade set.
3. Replace the blade set by hooking it into the housing and
pressing it down until it clicks into position (Fig. 7
ⓑ
).
Problem elimination
Blade set is cutting badly or pulling hair out.
Cause: Blade set is dirty or worn out.
f
Clean and oil the blade set (Fig. 8/90); if this does not
resolve the problem, replace the blade set (Fig. 7).
Skin injury
Cause: Too much contact pressure on the skin.
f
Reduce contact pressure when cutting close to skin.
Cause: Damaged blade set.
f
Check whether the blade edges were damaged during use
and replace the blade set if necessary.
Battery life is too short.
Cause: Blade set and housing opening are dirty.
f
Clean and oil the blade set (Fig. 8/9).
Cause: Battery power indicator is imprecise.
f
Fully discharge the battery before fully recharging it in one
uninterrupted charging process.
Cause: Battery is worn out.
f
Have the battery replaced at a service centre.
Battery power indicator light does not light up.
Cause: Appliance has not been correctly placed on the charg-
ing stand.
f
Ensure that the hand-held appliance has been correctly
placed on the charging stand.
Cause: Defective power supply.
f
Ensure that the plug-in transformer is plugged into the
mains socket.
f
Check the mains cable for possible damage.
Disposal
Handle with care! Environmental damage in the
event of incorrect disposal.
f
Discharge batteries prior to disposal!
f
Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impact on
people and the environment.
Adhere to the relevant legal requirements when disposing of
the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regulations
are specified for the disposal of electrical appliances,
based on EU Waste Electrical and Electronic Equip-
ment Directive 2002/96/EC (WEEE). In accordance
with this, the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge by local
collection points or recycling centres.
