Moseley Starlink SL9003Q, User Manual, Page: 12 / 141

1-2 Section 1: System Features & Specifications
Moseley SL9003Q 602-12016-01 Revision J
1.3 Specifications
Note: Other combinations of frequencies, bandwidths, and output power may be available
but not specifically listed here. Please contact Moseley Sales Department for availability.
Specifications are subject to change without notice.
1.3.1 System Specifications – Discrete
4 linear (32 or 44.1 kHz sample rate) + 2 data channels;
2 linear (44.1 kHz sample rate) + LAN (500 kbps) with 6-port MUX
Audio Capacity
(Typical Configurations)
2 linear (44.1 kHz sample rate) + 1 data channel
Frequency Range(s) 160-240 MHz
330-512 MHz
800-960 MHz
1340-1520 MHz
1650-1700 MHz
(Fully Synthesized, front-panel programmable, no adjustments)
Frequency Step Size 25 kHz
Occupied Bandwidth 200/250/300/500 kHz
Note: Rate & QAM mode dependent, see Table 1-1 for details.
RF Spectral Efficiency See Appendix
Threshold Performance See Table 1-1 below for details.
Audio Frequency Response vs. Sample Rate:
32 kHz: 0.5 Hz-15 kHz; -3 dB bandwidth, +/- 0.2 dB flatness
44.1 kHz: 0.5 Hz-20 kHz; -3 dB bandwidth, +/- 0.2 dB flatness
48 kHz: 0.5 Hz-22.5 kHz; -3 dB bandwidth, +/- 0.2 dB flatness
Audio Distortion <0.01%
<0.01% at 1 kHz (compressed)
Audio Dynamic Range 92 dB Digital (AES/EBU) IN/OUT
83 dB Analog IN/OUT
Audio Crosstalk < -80 dB
Audio Data Coding Method Linear
ISO/MPEG (Layer II)
Audio Sample Rate Selectable 32, 44.1, 48 kHz built-in rate converter
Audio Coding Time Delay Linear: 0 ms
ISO/MPEG: 22 ms
Channel Coding Time Delay
(Add to Audio Coding Delay
above) Depends on Interleave Factor - QAM Modem Configuration:
1 - 2.6 mS
2 - 3.7 mS
3 - 5.0 mS (typical)
4 - 6.0 mS
6 - 8.0 mS
12 - 14.0 mS
Bit Error Immunity >1X10E-4 for no subjective loss in audio quality
Async Data Channels One for each audio pair
Aggregate Transmission
Rates Depends on number of audio channels
Diagnostics FWD Power, REV Power, TX Lock, Radiate, RSL, BER, RX Lock