- 11 -
Tools and materials
May use the tools and information are shown in table.
Name
Name
User manual
Oblique mouth clamp
Screw driver
Multimeter
Wrench
Ammeter
Pincers
Insulating tape
Wire stripping pliers
Electrostatic prevention Bracelet
Wristband
Percussion drill
Battery check
1.
On the installation site, check the battery packaging to make sure it's intact;
2.
Check battery box according to the packing list, make sure all the material is complete, if
any damaged, please fill in the receipt;
3.
Please be careful while handling batteries, avoid any damage.
Installation
The battery is rack installed , steps shows below.
CAUTIONS
When begin to install the battery system, you should pay attention to the following matters:
1.
Installation space and load bearing. Make sure that there are sufficient fixed components to
install the battery system, and to ensure that the battery mounting bracket or the cabinet be
strong enough to bear the weight.
2.
Cable specifications. To ensure that the use of the connection of the power supply line can
match the maximum current requirements of equipment operation.