morse KP 286, User Manual

Page: 16 / 70

HARDWARE INSTALLATION
/ \
Example 2.
How to switch between TURBO and NORMAL modes:
Step 1 Set the system at TURBO mode (refer to example 1)
Step 2 The speed can now be switched by hardware or software:
a) Set by hardware switch:
Set jumper JP7 OPEN (or push the button of the front pannel),
to switch the system from TURBO to NORMAL mode.
or
b) Set by software switch:
Press the following key combinations to switch:
‘ Ctrl’ + ‘Alt’ 4- for NORMAL mode
and ‘ Ctrl’ + ‘Alt’ + * + ’ for TURBO mode
\ /
II-3.3.4 System RESET (JP6 & Keyboard)
There are two ways to warm start the system: The software RESET, by
pressing Ctrl-Alt-Del keys at once, and the hardware RESET, by setting jumper
(JP6) to CLOSE.
Note: Jumper (JP6) is usually connected to a button switch on the front pannel
by
wires, user just pushes the button to RESET.
RESET by
Media
Set/Pressing
Hardware Jumper (JP6) Close
Software Keyboard 'CTRL-ALT-DEL'
II-3.3.5 Display Mode Setting (DSW1-SW2)
DIP Switch
Description
DSW1-SW2
Off Mono
On Color
13