The Specialist In Drum Handling Equipment
Model 82AM
Mobile-Karrier / Palletizer
with Spark Resistant Parts
Operator’s Manual for Model 82AM Morse Mobile-Karrier / Palletizer with Spark Resistant Parts
Serial number 0212 to 0213 (MMYY)
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form PL82AM (0212-0213)
(Updated 24 May, 2019 11:58 AM)
3
Machine Description
The Mobile-Karrier / Palletizer is designed to lift, transport, and dispense a
ribbed 55-gallon steel drum 22.5” in diameter. The maximum capacity is 600
Lb. (272 kg)
Options
A smaller diameter drum can be handled with the correct size 55/30M
•
Series Diameter Adaptor installed (see
Diameter Adaptor literature
).
The
•
Bracket Assembly
(Part # 4556M-P) is
required
to handle a
plastic drum without a top rim (see figure 2.1). It is also recommended
to more securely handle a fiber drum. You can use the Bracket
Assembly with a 55-gallon plastic, steel or fiber drum. The brace
at top and bottom of the drum prevent it from slipping lengthways
through the drum holder. It adjusts for a drum 31” to 37” tall.
The
•
top Rim Clamp
(Part # 4560M-P) grips the upper rim of your drum
to prevent it from slipping through the drum holder (see figure 2.2). To
handle a 55-gallon plastic drum with top rim, you
must
install either
the Bracket Assembly or the Top Rim Clamp. You can use the Top Rim
Clamp with a 55-gallon plastic, steel or fiber drum with suitable top rim
Installation Instructions
Figure 2.2
Plastic
drum
being
lifted with part number
4560M-P Top Rim Clamp
Assembly installed.
Figure 2.1
Plastic drum being
lifted with part number
4556M-P Bracket
Assembly installed.
WARNING
Hydraulic pump is shipped with a plug in the
•
reservoir to prevent spillage in transit
Prior to operation, replace the shipping plug
•
with provided breather plug
Failure to properly install breather plug will void
•
manufacturer’s Limited Warranty
© 2012 - Morse Mfg. Co., Inc.
Part # PLTAG-04
