The Specialist In Drum Handling Equipment
Model 82A-SS
Stainless Steel Mobile-Karrier / Palletizer
operator’s Manual for Model 82A-SS Morse Stainless Steel Mobile-Karrier / Palletizer
Serial number 0313 to 0118 (MMYY)
morsedrum.com
Copyright 2018 - Morse Mfg. Co., Inc.
Form OM82A-SS (0313-0118)
(Updated 20 Apr, 2018 2:08 PM)
4
Controls
The Morse Mobile-Karrier is manually propelled and steered.
There are two functions for the operator to control:
“LIFT” and lower function for vertical positioning of the drum
1.
“TILT” function to control the degree of rotation of the drum
2.
LIFt and Lower Function
(Figure 2.3)
To raise the drum
Insert pump lever handle into pump socket.
1.
With the release valve closed, begin to pump the lever handle. The drum
2.
will lift.
To lower the drum
Open the release valve slowly, a part of a turn. Allow the drum to descend at a
controlled rate. The valve may be reclosed to hold the drum at any height.
tILt Function
To tilt the drum
Either one of the two spring loaded plunger tilt-locks may be locked to
1.
hold the drum upright. It is not necessary to lock both of them.
Position drum at pouring station.
2.
Before unlocking the tilt-lock(s) to permit tilting the drum, it is
3.
recommended that you steady the drum and be prepared for its possible
tendency to tilt toward its heavier side.
With both tilt-locks unlocked, manually tilt the drum for pouring. The drum
4.
pouring angle may be varied or it can be locked in horizontal position by
one of the tilt-locks.
WARnInG:
Keep hands and fingers clear of tilt lock hole, as a pinch point will occur when drum rotates.
Figure 2.3
