The Specialist In Drum Handling Equipment
Model 82A-SS
Stainless Steel Mobile-Karrier / Palletizer
operator’s Manual for Model 82A-SS Morse Stainless Steel Mobile-Karrier / Palletizer
Serial number 0313 to 0118 (MMYY)
Copyright 2018 - Morse Mfg. Co., Inc.
Form OM82A-SS (0313-0118)
(Updated 20 Apr, 2018 2:08 PM)
3
Machine Description
The Mobile-Karrier / Palletizer is designed to lift, transport, and dispense a
ribbed 55-gallon (208 liter) steel drum with 22.5” (57.2 cm) diameter. The
maximum capacity is 600 Lb. (272 kg).
options
A smaller diameter drum can be handled with the correct size 55/30
•
Series Diameter Adaptor installed (see
).
The
•
Bracket Assembly
(Part # 4556SS-P) is
required
to handle a
plastic drum without a top rim (see figure 2.1). It is also recommended
to more securely handle a fiber drum. You can use the Bracket
Assembly with a 55-gallon (208 liter) plastic, steel or fiber drum. The
brace at top and bottom of the drum prevent it from slipping lengthways
through the drum holder. It adjusts for a drum 31” to 39” (79 to 99 cm)
tall.
The
•
top Rim Clamp
(Part # 4560SS-P) grips the upper rim of your
drum to prevent it from slipping through the drum holder (see figure
2.2). To handle a 55-gallon (208 liter) plastic drum with top rim, you
must
install either the Bracket Assembly or the Top Rim Clamp. You
can use the Top Rim Clamp with a 55-gallon plastic, steel or fiber drum
with suitable top rim.
Installation Instructions
Figure 2.2
Plastic
drum
being
lifted with part number
4560SS-P Top Rim Clamp
Assembly installed.
Figure 2.1
Plastic drum being
lifted with part number
4556SS-P Bracket
Assembly installed.
WARNING
Hydraulic pump is shipped with a plug in the
•
reservoir to prevent spillage in transit
Prior to operation, replace the shipping plug
•
with provided breather plug
Failure to properly install breather plug will void
•
manufacturer’s Limited Warranty
© 2012 - Morse Mfg. Co., Inc.
Part # PLTAG-04
