background image

The Specialist In Drum Handling Equipment

Model 287-2H

Carriage Mount Drum Handler

operator’s Manual for Morse 

MORSPEED

 

tM

 Carriage Mount Drum Handler Model 287-2H

serial number 1010 to ____ (MMYY)

Copyright 2019  -  Morse Mfg. Co., Inc. 

Form PL287-2H (1010-____) 

(Updated 14 Jun, 2019 8:52 AM)

 

2

safety Information

 (continued)

DAnGeR 

- Indicates a situation which, if not avoided, will result in serious injury or death. 

This signal word is limited to the most extreme situations.

WARnInG 

-  Indicates  a  situation  which,  if  not  avoided,  could  result  in  serious  injury  or 

death.

CAUtIon 

- Indicates a situation which, if not avoided, can result in damage to the machine.

CAUtIon 

– Always transport with drum in lowest possible position.

WARnInG 

- The 

MORSPEED

 

TM

 is designed to handle one drum of the types listed at the top of page 3. 

Machine Description.  DO NOT attempt to handle any other type of drum or object.  DO NOT exceed 

the weight capacity of 1500 Lb. (680 kg) per drum.

WARnInG 

- Do Not Modify the Unit. Under no circumstances should any modifications be made to 

the Morse machinery without factory authorization.  Any modifications may void the warranty.  This 

machine was designed to perform a specific job and alterations may result in injury to operator or 

machine.

CAUtIon 

- Wear safety shoes with non-slip soles and hard toe protection.

CAUtIon:  

DO NOT allow drum to impact on floor, ground, or dumping station, etc.

WARnInG: 

This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 

2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to

the State of California to cause birth defects or other reproductive harm.

For more information go to 

www.P65Warnings.ca.gov

Summary of Contents for 287-2H









Reviews: