POWER BUGGY INSTRUCTION MANUAL
BARTELL MORRISON INC.
BARTELL MORRISON (USA) LLC
375 ANNAGEM BLVD, MISSISSAUGA, ONTARIO, CANADA, L5T 3A7, 905-364-4200 FAX 905-364-4201
200 COMMERCIAL DRIVE, FREEHOLD, NEW JERSEY, USA, 07728, 732-566-5400 FAX 732-5444
Created: 06/09
Revised: 08/14
Creep Adjustment
If the power buggy continues to travel or creep, after you have released the control lever, the
pump control arm needs a minor adjustment.
1. Chock the steering wheels.
2. Using a jack, raise the drive wheels off the ground.
3. Locate the pump control arm’s centering device.
4. Be certain that the machine is clear of any persons or degris and start the machine.
5. With a 9/16” wrench inserted into the centering device’s adjuster, loosen the jam nut
anad adjust the drive wheels stop turning. Tighten the jam nut.
Adjuster
Jam Nut
NOTE: Parking brake should always be set when power buggy is stopped or parked.
16
