For detailed operating method read the co rresponding content on the instruction manual.
Switch on the appliance
Press the Power switch button to switch on the appliance, Open the door.
Fill the detergent dispenser
With each wash cycle.
Compartment
For programmes with pre-wash only.
(Follow the user instructions!)
A
B C
Check the rinse aid level
Electric indicator on control panel (if provided).
Check the regeneration
salt level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
Load the baskets
Select a programme
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
Close the door
，
Press the programme button until the selected programme lights up.
( See the section entitled
“
Operation instruction
”
)
Running the dishwasher
T urn on the water tap and press the Start/Pause button. The machine will start working
after about 10 seconds.
Changing the programme
Add forgotten dishes in the
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Press the Start/Pause button ,then press the program button more than 3 seconds to cancel the
running programme. .
3. Select a new programme.
4. Restart the dishwasher.
dishwasher.
If the appliance is switched
off during a wash cycle.
1. Press the start/pause button to stop the machine.
2. Open the door.
3. Add the forgotten dishes.
4. Close the door, then press the start/pause button, the dishwasher will
start running again after 10 seconds.
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
Open the doo r carefully.
Hot steam may esc ape
when the door is opened!
Switch off the appliance
When the working cycle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the Power button.
Since the appliance is standing by, it will power off automaticly after 30 minutes without any operation.
Turn off the water tap,
unload the baskets
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
They will also dry better.Unload the appliance, starting from the lower basket.
