16
C l eaning the Sp ra y Arms
The spray arm s can be easily r emoved f or periodic cleaning
of the noz zles , to prevent possible clogging. Wash them
under running wat er and ca refu lly replace them in th eir seats,
checking that their rotary m ovement is in no way imp eded .
G rasp the mid dle of the spray arm, pull it upwards to rem ove
i t. Wash t he arms under a jet of runn ing water and return them
caref ully to their seat. Afte r reassembly, check th at the spray
arms turn free ly. Otherwise , check that they have been
i nstalled correctly.
After Every Wash
After every wash, turn off t he water supply to the
appliance and leave the door slight ly op en so that
moisture and odors are not trap ped inside.
Remove the Plug
Before cleaning or performing maintenance, always
remove the plug from the socket.
No Solvents or Abrasive Cleaning
To clean the exterior and rubber p arts of the di shw asher,
do not use solvents or abrasive cle ani ng products.
O nly use a clo th w ith warm so apy water.
To remove spots o r st ains from the surface of t he
interi or, use a cloth da mpened wit h water w ith a litt le
vinegar, o r a cleaning pro duct mad e speci fical ly for
dishw ashers.
When it is not in need for a long time
It is recommend t hat you run a was h cy cle with the
dishwasher empt y an d the n remove the plug from the
sock et, turn off the wa ter supp ly and leave the door of
the appliance slightly open. This w ill help the d oor
seals to ast longer and prevent odours from forming
withi n the appliance.
Moving the Appliance
If the appliance must be moved, tr y to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
Seals
One of the factors that cau se odors to f orm in the
dishwasher is food th at remains tr apped in the seals.
Periodic cleaning with a damp sponge will prevent t his
from occurring.
The installation of the pipes
and electrical equipments
should be done by professionals.
Electrical Shock Hazard
Disconnect electric al power
before installing dishwas her.
Failure to do so can result in
death or electrical shock.
The installation position of dishwasher should be near the existing inlet and drain
hoses and power cord.
One side of the cabinet sink should be chosen to facilitate the connection of drain
hoses of the dishwasher.
