1
2
3
4
5
6
7
8
1. Front Grill
2. Spinner
3. Blade
4. Plastic Nut
5. Rear Grill
6. Motor Shaft
7. Motor
8. Clutch knob
9. Handle
10. Thumb screw
11. Internal Pole
12. Height adjustment ring
13. Extension Pole
14. Base
15. 7-shape Bolt
16. Control panel
16
9
10
11
12
13
14
15
1. Unscrew the 7-shape Bolt from the Extension Pole. (Fig.1)
2. Insert the extension pole into the base and tighten the 7-shape Bolt. (Fig.2)
3. From the extension pole loosen the height adjustment ring and adjust the internal
pole to the desired height. (Note: If you
can’t find the internal pole, it must slide
inside the extension pole. You can pull it out from the extension pole.) (Fig.3)
4. To attach the head unit to the extension pole, loosen the thumb screw on the
bottom of the head unit. Place the head unit on the internal pole and tighten the
thumb screw in alignment with the groove on the internal pole. (Fig.4)
CAUTION:
Height adjustment ring must be fully fastened before the assembly of
the motor section to the extension pole.
2
ASSEMBLY OF BASE & COLUMN UNIT
PART FIGURE
