I.
Remote Controller (Fig.8)
“
” ON/OFF KEY
This key is for switching on the fan. The fan will be started at
medium. After 2 seconds, it will automatically over to low step.
Press this key again if the fan needs to switch off.
“
” TIMER KEY
Press the timer key repeatedly, the fan will off after "1-2-3-4-
5-6-7-8" hour.
Fig.8
“
” SPEED KEY
After the fan has started, this key serves as a speed selector in the sequence from
“low-medium-high-low” when this key being touched repeated or continuously.
II.
Control Panel (Fig.9)
These keys of the control panel may be used as same
as of the remote controller.
II.
Oscillation Control
To make the fan oscillate, press the clutch knob located
on the top of the motor housing. To get the directional
airflow, pull the clutch knob up to its initial position.
III.
Tilt Adjustment
To adjust the air flow upward or downward, push the
guards lightly to the desired direction.
IV.
Height Adjustment
The height of the fan can be adjusted by loosening the locknut, carefully raising or
lowering the fan and firmly re-tightening the locknut.
1. Press dawn on the battery compartment cover
and slide it out.
2. Insert the batteries, making sure that the positive
terminals are facing the proper way.
3. Replace the cover.
4
BATTERIES INSTRUCTIONS
(not included)
OPERATING INSTRUCTIONS
---ON/OFF SPEED
BUTTON
---TIMER BUTTON
Fig.9
