Clean the water tank
Every few weeks, clean the tank to prevent growth of mould, mildew and bacteria.
Partially fill the tank with clean water and add a little mild detergent. Swish it around
and then empty the tank and rinse. NOTE: Do not use a dishwasher to clean the tank.
After cleaning and drying the tank must be reinserted securely into the
dehumidifier in order to restart operation.
End of Season Maintenance
:
1. Empty and clean the water tank.
2. Clean the unit and the filters as per cleaning procedure above.
3. Coil the power cord on the special cord storage rest at the back of the unit.
4. Cover the unit and keep it in a dry place.
Power Cord Maintenance and Replacement
If the power cord is damaged, it could cause a short circuit or become a fire risk.
Please avoid pulling the cord, twisting or pressing it and keep it away from pets. If the
power cord is damaged, power the unit off and unplug it immediately. Contact an
electrician or service centre for repairs; do not attempt to repair the unit yourself.
FREQUENTLY ASKED QUESTIONS
Why doesn’t the unit work /or stops suddenly?
The water tank may be full or displaced.
To retore
: empty the tank and carefully place
the tank back in the unit.
Amount of water collected and size of the tank
1) When you first use your dehumidifier,it will work harder to reduce the room humidity
down to 50%RH (default mode or the desired humidity set, if the setting has
been changed). This is the time when it will produce the most water and as such will
require emptying more frequently (even 2 times/day). As the room
becomes dryer, the dehumidifier collects less water and it will take longer to fill the
tank, this is perfectly normal. When the target relative humidity has been reached the
dehumidifier will stop collecting water and will operate for longer periods in fan only
mode, this is normal operation. The intelligent logic of your machine will save you
money.
2) Unless you are using the unit to dry clothes,we recommend to set the desired
humidity to 50-60%RH
3)If you find that you still have condensation on your windows or you need to dry
the air further then the 40%RH or continuous mode can be used with fan set to turbo
mode. This might well be necessary if you have single glazed windows, the house is
poorly insulated or if the outside air temperature drops towards freezing.Using in turbo
mode will add more heat to your room and reduce your heating bill as dry air will heat
quicker
4) For unoccupied properties,garages and etc.,use 60-70%RH with fan in turbo or sleep
mode according to your needs. That will ensure minimum power consumption while
it shall also prevent moisture related issues.
19
Summary of Contents for MDD-10251W
Page 1: ...MDD 10251W ...
Page 25: ...MDD 10251W ...