Morris MDD-10251W, User Manual, Page: 32 / 48

Auto Heater Dehumidify Air Purify
Normal Sleep Tank full
CHILD LOCK TIMER
/
MODE
POWER
OSC
UV ION
FAN SPEED
Turbo
Oscillation Fan speed +/-Key Mode
Timer
Ionizer
UV
Power
CONTROL PANEL
POWER
POWER
After turning on the power, press the “Power” button to start the unit. Press
the “Power” button to shut down during operation.
Before shutting down the unit, the fuctions are Dehumidify, heat or auto
mode. If you press the “Power” button to turn off when working in
dehumidification, the fan will continue to run for about 2min, blowing off
the residual heat inside the unit. After the blown heat operation is
completed, the fan and the louvre will automatically close and the unit
will stop running(Do not remove the plug directly during the power-on or
during the hot air to avoid damage to the unit or reduce the unit’s life).
UV ION
UV & ION
The UV and ION functions are controlled by one button, and the control
logic is as follows: Press once, the UV function is turned on, the UV
indicator lights up, and the ION function and indicator light are off; Press
twice, the UV function is turned off, the UV indicator is off, and the ION
function and indicator are lit. Press for a third time, the UV and ION
functions all are turned on and the indicators are lit. Press for a forth
time, the UV and ION functions are turned off and the indicators are
off. Press the button again, the function logic will cycle again as listed
above.
TIMER
TIMER
Timed start function: When the unit is in standby mode, press the “Timer”
button, the right LED display timing button will flash, press “+/-” button,
the timing time will increase by 1h, and the timing time will be in a
“0-24-0” cycle, when the time is set to non-0 time, and there is no
operation for 3sec, the timing setting is successful, the timing button is
on. After the set timing time is reached, the unit is turned on. After the
timing setting is successful, press the “Timer” button to enter the double
8 flashing state. The timing can be readjusted with the “+/-” button.
Timed shutdown function: When the unit is powered on, press the “Timer”
button, the right LED display timing time flashes, press “+/-” to adjust the
timing time or directly adjust the timing time to 0h, the timing
function is canceled. After the time has elapsed, the unit stops running.
After the timing setting is successful, press the “Timer” button to enter the
double 8 flashing state. The timing can be readjusted with the “+/-” key.
When the timing function is turned on, the “Timer” button lights up, and
when the timing function is turned off, the timing button is turned off.
Child lock
7