Morris CIW-10715, User Manual

Page: 11 / 33

10
INSTALLATION
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2. Loosen the lock nut turn the feet until it closely contacts with the floor.
3. Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
hose. Energy consumption will decrease automatically for some program.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
2
3 4
1
Raise
Lower
Lock nut
foot
Warning! ！
Warning! ！
clamp nut
Loosen clamp nut and
four bolts
Τι
ghten clamp nut Press slide bushing ,
insert inlet hose into
connecting base
slide bushing
2
3
4 1
Connection finished
Tap with threads and inlet hose
Special tap for washer dryer
2.Connection between screw tap and inlet hose.
slide bushing