9
This function is ideal for cleaning vertical
surfaces and hard to reach places.
1.
Separate the handheld steam cleaner
(19)
from
the main body
(21)
by firmly pressing the
handheld release button
(7)
exactly where the
arrow is marked. Once you hear the click, pull
the handheld steam cleaner up and out of the
main body. Do not remove the handheld steam
cleaner until the click is heard.
NOTE: There may be some excess water
dripping from the valves on the inside of the
product, this is normal.
2.
If it is necessary to fill the handheld water tank,
turn the handheld steam cleaner upside down
and unscrew the filler cap lid. Use a suitable
filling jug to pour water into the handheld water
tank
(13)
until the tank is full.
IMPORTANT: To prevent limescale build-up in
the water tank, never fill your steam cleaner’s
tank with anything other than deionised,
demineralised or distilled water (available from
most leading supermarkets), or softened water
from a Morphy Richards water softener bottle.
Any problems arising from limescale will
invalidate the product guarantee.
3.
Plug in at the mains outlet and switch on your
steam cleaner at the On/Off power switch
(16)
.
The temperature indicator light
(8)
will flash red
during heat up and illuminate constantly red
when ready.
4.
To activate the handheld steam cleaner, press
the handheld steam lock/unlock button
(8)
on
the end of the handheld handle
(10)
, it will
illuminate blue - this indicates the steam release
is unlocked. Press either of the steam triggers
(5)
to release the steam.
Steam lock/un-lock button light indicator
settings
‘Flashing’ red light
This appears when the
product is first switched on and continues for
approximately 30 seconds. This indicates
heat-up is in progress. The steam triggers will not
operate during this heat-up time. When the heat-
up is complete the indicator light will change to
either solid red (if the hand-held is detached) or
blue if the hand-held is fitted to the upright body.
Solid red light
This light only appears when the
hand-held unit is removed from the upright
section. This light indicates that the steam
triggers of the hand-held are locked so no steam
can be accidentally released, this is a safety
feature. To unlock the steam triggers press the
centre of this unlock/lock button. When unlocked
the light will change to a solid blue colour. If
either of the steam triggers are not pressed for
60 seconds, the light will return to solid red,
indicating that the triggers have automatically
locked again.
Solid blue light
When this is illuminated, this
indicates that the steam is ready, and by pressing
the steam triggers steam will be emitted.
5.
The steam output can be varied (see step 5 of
‘Using in upright steam cleaning mode’ on page 8).
Using the handheld steam cleaner
Handheld Steam Cleaner
VC720520MUK Rev1.qxp_Instruction Booklet 07/04/2016 11:41 Page 9
