11
Two handheld steam cleaner positions
The handle may be used in two orientations: the
compact, upright mode; or the longer reach
extended mode. To change between the two
modes, press the handle rotate button
(15)
and
rotate the handle.
NOTE: The handle will only rotate in the
reverse
direction to which it was last moved, ie. if moved
clockwise to extend the handle, it can only be
closed by pressing the rotate button and
reversing the direction it was last moved in.
There are two steam triggers on the underside of
the handheld handle, so it can be used in either
orientation.
Refitting the handheld steam cleaner
NOTE: When re-fitting the
handheld steam cleaner
(19)
, always locate the
nozzle flush into the recess
of the main body
(21)
first,
then lift/tilt the handheld
steam cleaner into the
main body and press firmly
(whilst supporting the rear
of the main body) until it
clicks/locks into place.
If there is a gap between
the nozzle and the body,
this means the handheld
steam cleaner is not fitted
correctly and will not click
into place. The fit must
always be snug with no
gaps as highlighted
opposite.
2
1
3
Extended
Compact
VC720520MUK Rev1.qxp_Instruction Booklet 07/04/2016 11:41 Page 11
