6
Filling the water tank in upright mode
To achieve longer steaming time, fill the upright
water tank
(11)
on the back of the main body
(21)
. Water from here will slowly filter down into
the handheld water tank
(13)
in the handheld
steam cleaner
(19)
. Keep it topped-up for more
prolonged usage.
Press the upright water tank release button
(9)
and remove the upright water tank. Tip the
water tank upside down and unscrew the filler
cap. Use a suitable filling jug to pour water into
the upright water tank. Always ensure the water
level is above the MIN water level marker.
Never fill above the MAX water level marker.
Upright steam cleaning: assembly
A
C
D
B
A
Insert the handle
(3)
onto the main body
(21)
.
NOTE: Attaching the handle is necessary for first
time assembly only. If the handle needs to be
removed, press the bottom of the handle removal
catch
(6)
with a blunt tool or cross-head screw
driver whilst pulling the handle up.
B
Lower the main body onto the floorhead
(23)
,
until it clicks into place.
C
Insert the steam outlet nozzle at the bottom end
of the handheld steam cleaner
(19)
into the
adaptor at the bottom of the space in the front of
the main body.
Push the handheld steam cleaner firmly into the
space in the main body until it clicks into place.
NOTE: If the floorhead
(23)
needs to be removed,
press the floorhead release button
(22)
on the
rear of the product. This must only be done when
the product is switched off and cold.
D
Attach the microfibre floor cloth
(25)
to the
floorhead.
Upright Steam Cleaner
IMPORTANT: To prevent limescale build-up in
the water tank, never fill your steam cleaner’s
tank with anything other than deionised,
demineralised or distilled water (available
from most leading supermarkets), or softened
water from a Morphy Richards water softener
bottle. Any problems arising from limescale
will invalidate the product guarantee.
Replace the filler cap, turn the upright water
tank back upright and reinstall it back into the
main body.
NOTE: When removing or replacing the upright
water tank and the filler cap, there may be
some residual water in the tube of the upright
water tank. When the tank is tipped back
upright to refit to the main body, a small
amount of water may drip from the cap.
VC720520MUK Rev1.qxp_Instruction Booklet 07/04/2016 11:41 Page 6
