www.morphyrichards.com
6
FEATURES OF
YOUR STEAM
GENERATOR
Temperature
indicator light
The indicator light shows that
the iron is warming up. When
the required temperature is
reached, the light will go out
and will cycle on-off during
operation.
Steam function
During the steaming process,
small amounts of water may
be ejected from the soleplate.
This is normal and can be
avoided by using the steam
for short amounts of time and
only when the iron is at the
correct temperature (the
indicator light on the iron
goes out when ready).
Sudden jolts of the boiler unit
can also cause water
droplets on the soleplate;
therefore, do not move the
base unit during ironing. We
recommend for the first time
ironing that you iron over an
old towel.
Vertical steam
Hold the iron in a vertical
position between 1cm and
2cm away from the item
J
.
Press the steam trigger
⁄
,
this will create vertical steam.
This feature is especially
useful for removing creases
from hanging clothes,
curtains, wall hangings, etc.
EMPTYING AND
STORING
When you have finished
ironing, unplug your steam
generator.
1
Slide out the water tank and
remove the anti-scale filter
K
.
2
Empty the water in the tank
by holding it upside down
L
.
3
Replace the anti-scale filter
and reinstall the water tank.
Unplug the generator and
leave the iron to cool off for
15 minutes minimum. The
iron must be placed on the
iron rest plate.
The iron and boiler can now
be stored together.
MAINTENANCE
To clean a
stainless steel
soleplate
To keep the soleplate of your
iron clean and free of
limescale, we recommend
that you use one of the
gentle chrome, silver or
stainless steel cleaners that
are generally available.
Always follow the
manufacturer’s instructions.
To clean off melted
man-made fibres, set the iron
at 3-dot position and pass it
over a clean piece of cotton
which will draw the deposit
off the surface.
To clean a coated
soleplate
(certain models only)
In the unlikely event of any
man-made fibre fusing to the
soleplate, set the iron at the
3-dot position and pass it
over a clean piece of cotton,
this will draw the deposit off
the surface.
Do not use scouring powder
or solution, as this could
cause damage to the coating.
To clean the
exterior
Allow the steam generator to
cool and wipe over with a
damp cloth and mild
detergent, then wipe with a
dry cloth.
UK Helpline 0844 871 0960
Replacement Parts 0844 873 0726
Ireland Helpline 1800 409 119
J
K
L
RN42277MUK Rev10_Instruction Booklet 23/04/2013 13:47 Page 6
