Hot chocolate and hot
blackcurrant
1
Set the dial on top of the unit to one or
two cups, as required.
2
Fill the water reservoir to the one or two
cup level as appropriate. Do not overfill
the reservoir, only put in the exact
amount required.
3
Fill the thermal cup/s with the desired
amount of hot chocolate powder or
blackcurrant concentrate.
When brewing one cup only, the unit
will fill into the LEFT hand side.
Therefore put the powder or juice in
the left hand cup.
4
Fit both the thermal cups (with the lids in
place) into the unit even if brewing one
cup only.
5
Plug the drinks maker into the mains
supply.
6
When the unit is plugged in, the display
will show “00:00” as no time is set. The
red light in the centre of the power
button will show that the power is on.
7
To begin brewing immediately, press the
power button. The green LED will light as
brewing starts.
8
Once the unit has finished brewing, the
red LED will glow and the unit will beep
5 times.
9
The brewing process can be stopped at
any time by pressing the power button.
Warning: Remove the lids with
extreme caution and stir.
HINT: When brewing into two cups, a
combination of drink types can be
produced. For example: a cup of tea and a
cup of coffee or a cup of coffee and a cup
of hot chocolate etc.
Thoroughly wash the cups and all
removable parts after use, as described in
‘Cleaning care’.
Drinking cups
•
The drinking cups are portable and can
be used on the move.
• There is a rotating cap on the top of the
lid which helps to
retain the heat when
you are not drinking.
When you wish to take
a drink, simply turn
the cap in the
direction indicated by
the arrow and
carefully drink from
the cup.
Warning: Due to the risk of scalding,
take care not to over pour the cup as you
drink.
Warning: Remove the lids with
extreme caution.
Warning: Even though the cups are
portable, do not drink anything whilst
driving.
Setting the clock
•
Press the “
CLOCK
” button to begin
setting the current time.
• The digits on the display will flash
“00:00”.
• Press the “
HOUR
” button repeatedly
until the current hour is displayed.
• Press the “
MINUTE
” button repeatedly
until the current minutes past the hour
are displayed.
• Press the “
CLOCK
” button and the time
setting is complete.
5
