Important safety
instructions
The use of any electrical appliance
requires the following common sense safety
rules.
Primarily there is danger of injury or
death and secondly the danger of damage
to the appliance. These are indicated in the
text by the following two conventions:
WARNING: Danger to the person!
IMPORTANT: Damage to the appliance! In
addition we offer the following safety advice.
Location
• Remove all the packaging and retain for
future reference.
• Ensure the drinks maker is used on a
firm, flat, heat resistant surface.
• Do not use the drinks maker outdoors or
in a bathroom.
• Do not place the drinks maker on a
highly polished wooden surface as
damage may occur to the surface.
• Do not place the drinks maker on or near
hot surfaces such as a hot plate or
radiant rings or near a naked flame.
• WARNING: Do not place the drinks
maker onto a metal tray or metal
surface whilst in use.
Children
• Children do not understand the dangers
associated with operating electrical
appliances. Never allow children to use
this appliance.
Other safety considerations
• Disconnect the drinks maker from the
mains supply when filling, cleaning or
not in use.
• Keep the outside of the drinks maker
area clean and dry at all times.
• Do not touch hot surfaces. Always use
handles or knobs.
• Do not immerse the drinks maker itself in
water and always ensure the electrical
connections are kept dry.
• Do not operate any appliance with a
damaged cord or plug or after the
appliance malfunctions or has been
damaged in any manner. Ring the
helpline number for advice on
examination and repair.
• The use of attachments or tools not
recommended or sold by Morphy
Richards may cause fire, electric shock
or injury.
• Do not use abrasive cleaners on the
outside of the drinks maker, they may
scratch the surface. Clean only with a
soft damp cloth.
• Do not use the drinks maker for anything
other than its intended purpose.
Product safety
• Never use warm or hot water to fill the
water reservoir.
• Do not overfill the water reservoir.
Treating scalds
• Run cold water over the affected area
immediately. Do not stop to remove
clothing, get medical help quickly.
Personal safety
• Do not fill above the capacity of the
water level indicator marked.
• Do not touch metal parts until the unit
has cooled down.
• Do not remove the thermal cups until the
brewing process has completely
finished.
• Warning: Ensure that the amount of
water put in is correct for the cup
setting on the top of the unit before
beginning the brewing process.
• Always put both cups in place even
when only brewing into one cup.
• Warning: Hot drinks will scald, drink
with caution.
2
