3
Features of your toaster
Features of your toaster
Features of your toaster
Features of your toaster
Features of your toaster
Crumb Tray
Set slice control switch
Cord storage
Electronic variable browning control
Cool touch handle
Cancel button with neon
Frozen bread button with neon
Re-heat button with neon
Bread carriage lever/high lift feature
Bread slots
Before first use
Before first use
Before first use
Before first use
Before first use
•
Before using the toaster for the first time
operate the toaster without bread with the
slice control switch set to
and the
browning control set to 8. Note: the bread
carriage lever
will not stay down
unless the toaster is plugged in and
the wall switch is on. Ventilate the
room during this period.
•
As with all new electric heating elements,
your toaster emits a ‘new’ smell when it is
first switched on. This is quite normal and
not a cause for concern.
Instructions for use
Instructions for use
Instructions for use
Instructions for use
Instructions for use
1 Set the slice control switch according to
the number of slices to be toasted,
for 1 or 2 slices
for 3 or 4 slices.
If both sides of one or two slices are
required to be toasted then the bread must
be placed in the
bread slot as indicated
on top of the toaster. If you require the
bagels, buns or bread to be toasted on one
side only set the switch to the
and place
Using the cancel setting
When the bread carriage lever is
depressed, the cancel button
will illuminate.
If you wish to interrupt the toasting process,
press the cancel button.
Using the frozen bread button
To toast frozen bread, do not adjust the
browning control, place the bread normally in
the bread slots, depress the bread carriage
lever and press the frozen bread button
.
The button will illuminate and the toaster will
automatically toast for an extended period.
the bread in the
bread slot. Only the
side of the bread facing the right hand
bread slot will be toasted. Note that only
two slices of one-sided toast can be made
at a time.
2 Select the desired level of browning on the
browning control
marked 1 to 8. The
setting required will vary according
to the moisture content and
thickness of bread. For best
results ensure that the bread
slices are of even thickness,
freshness and size.
Remember that stale bread toasts more
rapidly than fresh and thin bread toasts
quicker than thick. See additional points for
more information.
3 After selecting the desired level, place
your bread in the slots
and depress the
bread carriage lever
downwards until it
locks.
4 After the set degree of browness
has been reached the bread will pop-up
automatically ready for removal from the
slots.The bread carriage lever will have
returned to its upper position and the
heating element will have switched off,
ready for the next toasting.
•
Note : that the toast can be made slightly
darker by using the re-heat function.
•
If the bread in your toaster becomes
jammed disconnect your toaster at
the socket, allow it to cool, then
remove the bread.
•
When not in use, switch your toaster off at
the mains and remove the plug from the
socket. DO NOT WRAP THE CABLE
AROUND THE MAIN BODY OF THE
APPLIANCE DURING OR AFTER USE.
