Assembly of a wall mounted unit
1
The base of the main unit can be used as a template for fixing the two screws on the
wall.
•
The two guide holes (see diagram) will help you to obtain exact locations of the
screws.
2
Drill two holes into the wall in the desired location.
3
Insert two of the wall plugs into the two drilled holes.
4
Insert two screws into the wall plugs and screw them down, leaving about 1cm of the
screw head exposed.
5
Locate the two wall hanging locations on the back of the unit over the screw heads.
6
Once you have mounted the main unit in its intended location fix the speaker
position as desired, by following steps 2 and 5. Please take care to leave enough
room for the sliding cd door to open (see diagram below).
6
Wall mount
screw guide
Wall mount
screw guide