Programming the cd player
•
The cd player can be programmed to play any sequence of upto 20 tracks as
desired.
1
Always press the
STOP
button before starting the programming.
2
Press the
MEMORY
button once, the display will show a memory symbol
flashing. The display will show ‘P-01’ to indicate that it is now in memory
programming mode, at
memory position 1
.
3
Press the
NEXT
or
BACK
button to select the track number (displayed in large
digits on the left) that you wish to be stored in the first memory position and
press
MEMORY
button to confirm your selection.
4
When you press
MEMORY
the display will advance to the next memory position
number (eg ‘P-02’ for 2nd position).
5
Repeat the previous steps, each time you select any track number of your
choice to be stored in the successive memory (program positions).
•
After programming the track number remember to press the
MEMORY
button.
6
After a maximum of 20 tracks (or less) have been selected, press the PLAY
button .
•
The display will now indicate the track number of the 1st track in the memory
currently playing.
•
The memory symbol will remain on to indicate that you have saved a program
memory sequence.
7
Pressing
NEXT / BACK
buttons will move to the next or previous song in the
saved sequence.
8
To clear (cancel) the entire program stored in memory, simply press the
STOP
button to return to normal cd mode or press
OPEN / CLOSE
button to clear the
entire memory.
9
To stop playback of your saved sequence temporarily without going to the 1st
track in memory use the
PLAY / PAUSE
button instead of the stop button.
13