12
Loading and unloading of Cds
1
The set must be switched ‘on’ and in ‘cd mode’, by pressing
CD SELECT
button.
2
Press the door
OPEN / CLOSE
button once to open the door.
3
Place a cd into the compartment with the label-side facing outwards towards you.
4
Press the door
OPEN / CLOSE
button to close the cd door.
•
The cd is now ready to be played.
5
To remove a disc, reverse the procedure as described above.
Cd operation
1
Insert a cd as described.
•
Once the cd door is closed (with a disc inside) the unit will immediately read the
disc and display the number of tracks on the cd as well as the total playback
duration in minutes and seconds.
2
Press the
PLAY / PAUSE
button. The disk will start spinning and the first track
will play. The display will indicate the current track number ‘01’ if it is the first
track.
3
To pause playback at anytime during playback, press the
PLAY / PAUSE
button.
Press the
PLAY / PAUSE
button again to resume operation at the same
track and position.
4
At any time during playback, press the
STOP
button to stop playback. This will
stop playing and display the total number of tracks and playtime.
5
To start playing press play, the first track will be played and its information will
be displayed.
6
At any time during playback, press and release the seek/scan switches:
BACK
or
NEXT
to skip backwards or forwards by one track.
7
Press and hold the seek / scan switches
BACK
or
NEXT
to fast-reverse or fast-
forward the specific track which is currently playing.
8
At any time during playback, press the ‘cd repeat switch’ as follows:
Press once to repeat the current track (repeat symbol will flash).
Press again to repeat all tracks (full cd). The repeat symbol will stay on and
press again to disable repeat.