7
The anti-drip valve
È
will prevent
any remaining coffee dripping onto
the hot plate during serving. Ensure
that the jug is replaced on the hot
plate after serving.
We suggest consuming your coffee
within two hours, after this time we
suggest brewing another jug of
fresh coffee.
WARNING: The coffee maker
and hot plates are hot and
remain hot for some time after
switching off.
NOTE:
•
Remember to turn off the machine
when you have finished.
•
Allow the unit to cool.
•
Remove the permanent filter and
empty the used coffee grounds.
Wash the filter immediately and dry
thoroughly.
•
Thermal Carafe Variants
•
When the brewing process is
complete the product remains on,
we recommend you switch off your
coffee maker as soon as brewing is
complete.
•
The thermal carafe will keep the
coffee warm in the jug for up to
‡/·
four hours.
•
The anti drip valve
È
will prevent
any remaining coffee dripping onto
the base recess during serving.
•
We suggest consuming your coffee
within two hours, after this time we
suggest brewing another jug of
fresh coffee.
•
WARNING: The coffee maker
and hot plates are hot and
remain hot for some time after
switching off.
NOTE:
•
Remember to turn off the machine
when you have finished.
•
Allow the unit to cool.
•
Remove the permanent filter and
empty the used coffee grounds.
Wash the filter immediately and dry
thoroughly.
DIGITAL INTERFACE
VERSIONS
„
Set the clock
•
When the machine is plugged in,
the display will flash 12:00 dimly.
•
To set the time press the hour
button
ˆ
and minute buttons
˜
to
reach the desired time.
NOTE:
The clock is a 24 hour clock.
The clock will be reset, each time
the product is unplugged at the
wall.
Making coffee
1
Press the push button
fi
to open
the hinged lid. The lid will
automatically rise
G
.
2
Using the jug, fill the water reservoir
¤
with the required amount of
water using the level indicator
Ê
as
a guide. Both the jug and water level
indicator are marked in cups
H
.
3
Spoon
‹
the required amount of
ground filter coffee into the mesh
filter
›
spreading evenly. We
suggest one level measuring spoon
for every cup. Ensure the filter is
sitting properly in the filter holder
I
.
4
Close the lid. Ensure the lid is
closed and latched properly,
J
otherwise the machine will not
function correctly.
5
Slide the jug
‡/·
into the coffee
maker ensuring it sits correctly on
the hot plate
K
. The jug lid must be
in place during the brewing process;
otherwise the non drip valve will not
open, causing the filter to flood.
•
T
hermal Carafe Variant
NOTE:
Thermal carafe versions have no hot
plate. Please ensure the jug sits
correctly on the base recess.
•
Ensure the jug
·
lid is fully closed
by turning the lid clockwise, this
ensures the maximum temperature
is maintained in the jug. To ensure
the coffee is kept as warm as
possible we advise you rinse your
thermal carafe in hot water before
use.
g
6
OPERATING THE
APPLIANCE
Before use
Before using your coffee maker for
the first time or if you have not used
it for some time, rinse the machine
by running water through. Follow
the procedure for making coffee,
without coffee in the filter holder.
The product that you have
purchased is available in four
different versions:
•
Manual version - Glass carafe
•
Manual version - Thermal carafe
•
24 hour automatic timer version -
Glass carafe
•
24 hour automatic timer version -
Thermal carafe
For the complete understanding of
how to use your machine please
refer to the specific section related
to your version.
Please note not all variants are
available in all countries, please
contact your retailer for more
information.
MANUAL INTERFACE
VERSIONS
‚
Making coffee
1
Press the push button
fi
to open
the hinged lid. The lid will
automatically rise.
2
Using a jug, fill the water reservoir
¤
with the required amount of
water using the level indicator
Ê
as
a guide. Both the jug and water level
indicator are marked in cups
A
.
3
Spoon
‹
the required amount of
ground filter coffee into the mesh
filter
›
spreading evenly. We
suggest one level measuring spoon
for every cup. Ensure the filter is
sitting properly in the filter holder
B
.
4
Close the lid. Ensure the lid is
closed and latched properly
C
,
otherwise the machine will not
function correctly.
5
Slide the jug
‡/·
into the coffee
maker ensuring it sits correctly on
the hot plate
D
. The jug lid must be
in place during the brewing process;
otherwise the non drip valve will not
open, causing the filter to flood.
•
Thermal Carafe Variant
NOTE:
Thermal carafe versions have no hot
plate. Please ensure the jug sits
correctly on the base recess.
•
Ensure the jug
·
lid is fully closed
by turning the lid clockwise, this
ensures the maximum temperature
is maintained in the jug. To ensure
the coffee is kept as warm as
possible we advise you rinse your
thermal carafe in hot water before
use.
•
Please note the jug lid must be in
place during the brewing process;
otherwise the non-drip valve will not
open, causing the filter to flood.
6
Select the required strength of
coffee using the strength selector
on the lid
E
.
7
Plug the filter coffee maker in at the
wall socket and switch on. Rotate
the dial
Ï
to select one of the two
on positions available: 1/2 carafe or
a full carafe,
F
depending on the
number of cups required. Refer to
‘Cup selection function’ page 10 for
further information.
8
The cup selection indicator and the
power on indicator
Ô
will light up.
The hot water will start to flow
through the coffee grounds and into
the jug as coffee for you to enjoy.
•
Glass Carafe Variant
When the brewing process is
complete the product will
automatically switch to keep warm;
the auto keep warm indicator will
light up.
The automatic keep warm function
will keep the coffee warm
in the
carafe until the product is switched
off.
For safety reasons the coffee maker
will automatically switch off after
two hours.
A
B
C
D
E
G
H
I
J
K
F
Summary of Contents for 10-12 CUP FILTER COFFEE MAKER
Page 77: ...153 152 ...
Page 79: ...CM47060MEE Rev 4 09 08 156 ...