MORNSUN TD3USPCAN Application Notes Download | Manualshive

Page: 56 / 61

background image

第 56 页共 60 页

Figure 4.2 Timing diagram of configuration command written through SPI

4.4.2 Configuration mode of upper computer

If users don't want to configure TD5(3)USPCAN through MCU, they can use the upper computer

configuration method to configure the product first, and then use it after the configuration is completed. For
configuration through the upper computer, TD5(3)USPCAN configuration software and TD5(3)USPCAN
evaluation board are needed. Please refer to Section 5 (Auxiliary Development Tools) for detailed
configuration instructions.

5. Auxiliary development tools

5.1 TD5(3)USPCANCFG

configuration software

TDxUSPCANCFG is an auxiliary development tool specially developed for TD5(3)USPCAN series products.

Users can use this software to configure the product very conveniently. At the same time, the software
provides the complete frame data of the write configuration command frame currently selected and
configured by users, and users can directly copy it into the program for use, thus avoiding the tedious work of
setting the command frame by users. The main interface of TD5 (3)USPCAN config is shown in figure 5.1.

«
...
54
55
56
57
58
...
»

Summary of Contents for TD3USPCAN






























































Reviews:

No comments

Related manuals for TD3USPCAN

MICROCOMPUTER MN103S

Brand: Panasonic Pages: 5

MICROCOMPUTER MN103S

Brand: Panasonic Pages: 21

Brand: Panasonic Pages: 56

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 2

WJMPU955 - PROCESSING UNIT - TMU

Brand: Panasonic Pages: 62

Brand: Usr Pages: 2

Brand: Neo Instruments Pages: 2

Brand: Quantum Pages: 7

AT32F421 Series

Brand: ARTERY Pages: 337

Brand: Hama Pages: 25

Brand: JETWAY Pages: 47

netHOST NHST-T100

Brand: hilscher Pages: 75

Brand: Variscite Pages: 17

ExtremeCloud Appliance E1120

Brand: Extreme Networks Pages: 219

Brand: Allen-Bradley Pages: 76

EK-FC670 GTX Series

Brand: ekwb Pages: 2

EK-FC 780 GTX Lightning

Brand: ekwb Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands