MORITEX MLEK-A120W2LR, Instruction Manual

Page: 8 / 13

20
6. Specifications
Model
MLEK-A120W2LR
Input Voltage AC100-240 [V] (TN-C power distribution system)
※
1
Input Current 0.35/0.20 [A]
(AC100/ 240 [V])
(AC100/ 240 [V])
Input Frequency 50/60 [Hz]
Rushing Current
15 [A]max. at AC100 [V]
36 [A]max. at AC240 [V]
※
2
Number of Outputs 2 channel (Each channel is controlled separately)
Output Voltage Max 12.5 [V]
Output Current
1.2 [A]max. : Shared
Output Control Constant current control
Output Characteristics Continuous DC output
Output Adjustment
Function
Yes
Manual / Remote (Channels are controlled separately)
Output Range 0
– 100 [%]
Remote Control Yes (Channels are controlled separately)
EXT0-5V / EXT VR (with changeover function)
Output ON/OFF control
Environment Conditions Indoor use
Altitude up to 2000m
Temperature 0
℃
to 45
℃
Maximum 80%RH for temperatures up to 31
℃
decreasing linearly to 50%RH at 40
℃
MAINS supply voltage fluctuations up to
±
10% of the nominal voltage
Installation category
Ⅱ
For use up to Pollution degree 2
Storage
Temperature/Humidity
-20
～
85 [
℃
] / 20
～
85 [%RH] (non-condensing)
Installation Method Horizontal installation on rubber feet.
Protection Class Class
Ⅰ
equipment
Cooling Method Air-cooling
International Protection
Degree
IP30 (EN60529)
※
3
Dimensions W75×H110×D190 (Protuberances excluded)
Mass Approximately 1.3 [kg]
CE Marking Low Voltage Directive : 2014/35/EU
EMC Directive : 2014/30/EU
RoHS Directive : 2011/65/EU, 2015/863
※
4
※
1 Please use power supply cord set satisfying the input AC voltage / current ratings of the unit and complying
to the relevant standards / laws of the area where you use this product. (Please confirm a model of
an attached power supply cord set to the product with the table of optional items.)
※
2 Specification for cold-start
※
3 An object equal to or more than a diameter of 2.5mm does not reach hazardous parts inside the unit. The unit
is not protected against invasion of water.
※
4 MLEK-A120W2LR and all Optional Items, except stated explicitly do comply to these European Standards
upon which CE marking is declared. Additionally, please use a Class
Ⅰ
power supply cord set which confirms
to CE marking in order to conform the unit to CE marking.
(Optional Item MC-AC200A-2.0M does comply with CE marking.)