33
[5]Operation 6.
CAUTION
For operation and settings, see (4) above.
1)Remove Nozzle
The nozzle can be removed and autoclaved.
Hold down the push button, grip the cover nut and pull the nozzle
straight out.
2)Nozzle Attachment
To reattach the nozzle, hold down the push button, grip the cover
nut and push the nozzle straight in.
(6)Three-way Syringe WS97*
<Snap-on Connection>
For operation and settings, see (4) above.
1)Remove Body
The body can be removed and autoclaved.
Hold down the push button for the body and pull it straight off.
To reattach it, push it straight in until it clicks into place.
2)Body Attachment
To reattach the body, hold down the push button and push it straight
on.
(5)Three-way Syringe WS201
<
Removable Nozzle
>
Nozzle Push button
Cover nut
Push button
Nozzle
Body
Cover nut
Before using the three-way syringe, make sure to check that the screw fixing
the tube at the low end of the syringe is tightened up.
If the screw is not tightened up, tighten it up with your fingers.
>>If the tube comes off the syringe, the head of the tube will spring out suddenly. That
would cause an unexpected accident and the leakage of water and air.