Morgana KB2000, Operator'S Manual

Page: 5 / 36

Important
1. General Information
Air-Compressor (pump)
The air-compressor (pump with tank) must always be in upright position.
After unpacking, the pump has to be placed in upright position for 30
minutes before switching on! This allows the oil in pump to move in place.
In case pump had been transported and you are not sure about it`s upright
position in transit: Let have rest the pump in upright position for 30 minutes.
During de-installation of pump – prior to any transport - please seal inlets
and outlest of pump with caps.
Please follow: Section 7 Air-Compressor in
this manual carefully!
Positioning of FKS PrintBind KB 2000
Place the FKS PrintBind KB 2000 on perfect horizontal level.
In case the FKS stand-cabinet (on rolls) is part of the delivery:
Take care that the stand-Cabinet is positioned on horizontal level as well.
Please follow Section 2. Installation
Warm-Up time of glue
Take in account that it must be allowed to wait 30 to 40 minutes after
switching on the machine to melt the glue up to desired temperature prior
to first binding.
For limited interruption whilst binding a stand-by position can be selected.
(Please follow section 4 and 5.)