3
PARTS IDENTIFICATION
SPECIFICATIONS
1. Spray nozzle
2. Water filling inlet
3. Variable steam control
4. Burst of steam button
5. Spray button
6. Temperature control dial
7. Soft touch grip
8. Cord protector
9. Power Indicator Light
10. Transparent water tank
11. Self-cleaning buttona
12. Sole plate
13. Measuring cup
MODEL
MSI-SC15CS
RATED VOLTAGE / FREQUENCY
220-240V~ 50H
z
RATED WATTAGE
2000W
6
OPERATING INSTRUCTIONS
DRY IRONING
• For ironing without steam, follow the instructions in section “steam ironing”, however,
the steam control turning knob should remain in position O (no steam).
• Turn the temperature control dial to min and the steam control turning knob to dry.
• Set the iron on vertical position and plug it in. The pilot light will come on.
• Turn the temperature control dial to bring the required setting.
• Start ironing when the pilot light on. Next to mark. When the iron gets up to
temperature, the light will cut out, then cycle on and off as the temperature is
maintained.
ANTI-CALC SYSTEM
A special filter inside the water tank softens the water and prevents scale build-up in the
soleplate. The filter is permanent and does not need replacing.
Note: Use tap water only. Distilled and demineralized water makes the anti-calc system
ineffective by altering its physicochemical characteristics.
SELF-CLEANING
The self-cleaning feature cleans inside the soleplate, removing impurities. We recommend
using it every 10-15 days.
• Set the steam control turning knob to position O (no steam)
• Fill the water tank to the maximum level.
• Set the temperature control dial to MAX and wait for the pilot light to turn off.
• Pull the plug out of the socket and press the self-cleaning button until the boiling water,
steam, impurities come out.
• When the soleplate has cooled down, you can clean it with a damp cloth.
MSI-SC15CS(IM)#061213_Layout 1 12/18/13 3:52 PM Page 2
