3-IN-1 BUTANE SOLDERING IRON
WARNING!
READ, UNDERSTAND AND FOLLOW ALL
INSTRUCTIONS AND WARNINGS
BEFORE OPERATING THIS TOOL.
FAILURE TO DO SO MAY RESULT IN
PERSONAL INJURY AND/OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
Some dust, peelings, residue, and vapors caused by
soldering and paint removal activities contain chemi-
cals known to the State of California to cause birth
defects or other reproductive harm. An example of
a chemical would be flux fumes from soldering and
de-soldering (do not use a heat tool to remove lead-
based paint). Your risk from exposure varies, depend-
ing on how often you do this type of work. To reduce
your exposure to these chemicals: work in a ventilated
area, and work with approved safety equipment, such
as dust masks that are specially designed to filter out
microscopic particles.
1 YEAR WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal rights. Except where prohibited
by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of warranties and remedies. There may be other rights which vary
from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use and service. A defective product may be returned
for a free replacement within 90 days from the date of purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90
days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination shall disclose to be defective and
under warranty. These warranties shall be valid only when a sales receipt showing the date of purchase accompanies the defective product or defective part(s) being
returned. For part(s) after 90 days, please remit your request, postage prepaid to: PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under normal use and service. These
warranties shall not apply to any product or part which is used for a purpose for which it is not designed, or which has been repaired or altered in any way so as to affect
adversely its performance or reliability, nor shall these warranties apply to any product or part which has been subject to misuse, neglect, accident or wear and tear
incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied warranties of any kind with respect
to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability and no implied warranty of fitness for any particular purpose, except
that for goods purchased primarily for personal, family or household use and not for commercial or business use, PERFORMANCE TOOL® makes an implied warranty of
merchantability (and, if otherwise applicable, an implied warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the
duration, expressly warranted above.
The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any product, or to the design, use,
or any inability to use the product. The sole and exclusive remedy for a defective product or part shall be the repair, or replacement thereof as provided above. The laws
on limitation of remedies or on consequential, incidental or special damages may vary from state to state, so the above limitations may not apply in all cases.
© Copyright 2019 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138
OWNER'S MANUAL
Item Number W2081
SPECIFICATIONS:
Tank Capacity ............................................................... 8.5ml
Max. Operating Time .......................................... 30-40 mins.
Blow Torch Temp. Max. ..................... up to 2372°F (1300°C)
Solder Tip Temp. Max. ........................... up to 752°F (400°C)
Hot Blower Temp. Max. ......................... up to 932°F (500°C)
Technical specifications are subject to change without notice.