Grill & Fan Blade Assembly
1.
Unscrew the spinner clockwise (or take the spinner out from the bag)
and the plastic nut counter clockwise to remove both of them. Fix the
rear grill to the motor then tighten the plastic nut again. (Fig.5)
2.
Insert the blade into shaft, and make sure the rotor shaft pin is fitted
into groove of the blade. Turn the spinner counter clockwise to tighten
the blade. (Fig.6)
3.
Fix the front grill and the rear grill with guard ring and then use the
fasten clip to tighten the fan grill. (Fig.7)
NS
I.
Remote Controller (Fig.8)
a.
KEY INSTRUCTION
1.
ON/OFF KEY
The key is for switching on and off the fan. The
fan will be started at breeze step.
Press again the key if the needs to switch off.
2.
SPEED KEY
When the fan started, press this key repeated,
the fan will work with
“0-1-2-3-4(Off-Breeze-
Low-Medium-High) circulatory.
Fig.8
Summary of Contents for MSF-16P3R
Page 1: ...Stand Fan MSF 16P3R ...
Page 11: ......
