Assembly of chassis & Column Unit
1.
Unscrew the 7-shape Bolt from the Extension Pole. (Fig.1)
2.
Insert the extension pole into the chassis and tighten the 7-shape Bolt
(Fig.2)
3.
From the extension pole loosen the height adjustment ring and adjust
the internal
pole to the desired height. (Note: If you can’t find the
internal pole, it must inside the extension pole. You can pull it out from
the extension pole.) (Fig.3)
4.
To attach the head unit to the internal pole, loosen the thumb screw on
the bottom of the head unit. Place the head unit on the internal pole and
tighten the thumb screw in alignment with the groove on the internal
pole. (Fig.4)
CAUTION:
Height adjustment ring must be fully fastened before the
assembly of the motor section to the internal pole.
Fig.1
Fig.2
Fig.3
Fig.4
Summary of Contents for MSF-16P3R
Page 1: ...Stand Fan MSF 16P3R ...
Page 11: ......
