8
9
COOKING OPERATION
CONTROL PANEL
DISPLAY SCREEN
Start Button
MenuButton
Display Screen
Temperature (ºC)
Button
Cancel Button
Rotation
Button
Timer
Button
Timer/Temperature (+)
Button
Timer/Temperature (–)
Button
Rotation
Indication Light
Operatin
Indication Light
Power
Indication Light
Function Indication Light
Temperature
Indication
Light
Timer
Indication
Light
1. Open the Lid and place the Base Bowl in position on the Main Body of the appliance as previously
described in this booklet.
2. Select the required accessory if required. Always make sure to leave sufficient space between the
food and the cover.
3. Close the Lid as previously described in this booklet.
4. Connect the appliance to the power supply. The appliance will beep once.
The Power/Menu/Rotation indication light will flash, the display screen will show “----- “ indicating
Standby Mode.
5.
MENU SELECT
● In state of standby mode, press the “Menu” button to select the functions for “DIY”–“Nuts”
“Chicken”
a
“Cake”
a
“Skewer”
a
“Steak”
a
“Fries”
a
“Fish”. The screen will show the
menu selected. The indication light of temperature/timer will be also shown for each menu.
● Select the DIY function, set the temperature/cooking time according to the below instruction.
After setting, the appliance will begin operation automatically.
Note: Temperature/ Timer button is not available for other menus.
● Timer setting
In standby mode or cooking process, press Timer (+) or Timer (–) button to increase or decrease
time by minutes; long press on Timer (+) or Timer (–) button allows the time to increase or
decrease by a 5-minute interval. It will stop upon reaching the maximum 99 minutes or minimum
1 minute.
● Temperature setting
Press this button to adjust temperature in standby mode. The last three digits will flash when the
Temperature button is pressed. Press “+” “–” to increase or decrease the temperature. The
adjusted temperature range is 80°C~210°C. Press “+” “–”, to increase or decrease temperature by
5°C; long press on “+” “–” allows the temperature to increase or decrease by 10°C and will stop
upon reaching the maximum 210°C or minimum 80°C.
6.
ROTATION bUTTON
● When cooking by Drum or Rotisserie Forks, press this button to select the rotation modes. The
rotation indication light will be turned on when it is rotating.
● Press this button again to stop rotation.
7.
START/CANCEL
● During standby mode, press the Start button to operate the appliance and the timer will begin
countdown.
● If appliance is not in standby mode, pressing the Cancel button will cancel the current position and
return to the standby mode.
8. After cooking has completed
● The Screen will show “-----”.
MAF-Optimal8(IM)080318.qxp_Layout 1 4/4/18 3:30 PM Page 5
