Libretto istruzioni - Bedienungsanleitung - Instructions book
M O R G A N Catering Equipment GmbH Münchner Str. 1C
85232 Bergkirchen
Tel: +49-8131-297256-0
Fax: +49-8131-29725633
E-Mail: [email protected]
Web: www.morgangmbh.de
24
IMPORTANT SAFETY PRECAUTIONS
−
Do not touch the machine when you have wet or clammy hands or feet.
−
Do not use the device with bare feet.
−
Do not use extension leads in rooms used as shower or bathroom.
−
Do not pull the power cable to disconnect the machine from the power point.
−
Do not leave the machine exposed to weather conditions (rain, sun, etc.)
−
Do not allow children or unqualified people to use the machine.
−
Do not put your hands under the steam nozzle o under the group while water or steam is
being supplied, so to avoid scalds.
−
In working conditions, the steam nozzles, the water nozzles and the filter holder cups are
overheated. They have to be handled with care and hold on the appropriate points.
−
Cups and little cups have to be put on top of the cup heater only after being thoroughly
wiped.
ATTENTION
WHEN WORKING THE BOILER CONTAINS PRESSURED HOT WATER AND STEAM
TECNICHAL FEATURES
The Espresso machines are provided in the following versions:
CONTINUOUS SUPPLY or AUTOMATIC SUPPLY in the versions: water tank 5,2 lt. or direct water
connection. All models include built-in volumetric electro pump.
On all models, there is standard self-levelling boiler installed.
On all models, it is possible to drain all water of the boiler through apposite tap.
All models are prearranged for the installation of electric cup heater (on some models it is
standard).
INSTALLATION
Make sure the connections to the water supply and power grid as well as to the drain have been
arranged in compliance with accepted standards. Electricity needs to be done through a circuit
breaker fit for the power of the machine and provided by heat protection and efficient ground
connection (these works have to be done by qualified people).
Check that the power voltage matches with the machine’s voltage before electrically connecting
the machine. If such condition is missing, it is not answered for damages to things and/or people
resulting from failed compliance with the current safety regulations.
Before proceeding with the machine’s water connection to the network, let water flow from the
water system to remove possible residuals. Then, let water flow through the water softener for
about two or three minutes before connecting it to the machine.
