29
ENGLISH
12.3 Battery Pack Replacement
To replace the battery pack, follow the instructions below.
1. Remove the AC power source & disconnect the DC plug.
2. Open the battery cover by removing the screw on the back of the
pump unit.
3. Take out the battery pack by pulling the cable connector.
4. Plug in the new battery pack connector and insert the battery pack.
5. Put the cover on and screw back.
6. Connect the pump to a power outlet using the included cable and
power adaptor to recharge the battery.
WARNING! It is prohibited to use the battery pack not from the
vendor. The charging function of the pump is designed for the
battery pack only. The vendor will not warranty any damage from
another battery pack not supplied by the vender.
Higher temperature will shorten life of the battery pack, please keep
the battery in a cold place and avoid direct sunlight.
NOTE.
The Velcro serves to secure the battery for the purpose of
ensuring the stability of battery pack. It’s recommended to check if the
Velcro is secured before putting the cover back.
WARNING!
Lithium-ion battery, DO NOT disassemble or remove outer
casing, short-circuit, puncture, crush, incinerate or expose to heat
source, due to risk of fire and combustion.
13. MAINTENANCE
The LEVITAS devices by moretti are checked carefully and supplied with EC mark, once launched
on the market. For patient and physician’s safety we recommend to let check the device by the
manufacturer or by laboratory authorized every year. In case of repair, use only original spare
parts and accessories.
14. STORAGE
1. Disconnect the air hose from the cushion to the pump.
2. Protect the air tube coupler by putting it inside of seat cushion.
3. Place the whole system into a protective bag.
WARNING! For storage period more than 3 months, disconnect the Li-ion battery pack
from the pump and make sure the battery is partially charged. This will help to keep
the performance and life of the battery. Do not store the system under direct sunlight,
high temperature or moisture area.
15. CLEANING AND DISINFECTION
It is important to follow the cleaning procedures to avoid cross contamination. Be sure to clean
the surface in a dry and dust free environment. Wipe down the pump unit with a damp cloth
pre-soaked with a mild detergent. Avoid contact with dust and proximity to dusty areas. Make
sure that any cleaning agents you use will not harm or corrode the plastic casing on the pump
unit. If your doctor or medical facilities have other special cleaning instruction, please follow the
professional instruction.
