7
To start the unit,
1.
Place the unit on a solid, flat, dry surface making sure that
the water reservoir and medicine cup have been properly
filled and the mouth nozzle is properly attached to the top
cover.
2.
Turn the switch at bottom of unit to "ON" position The LED
indicator should be lit.
3.
Press the ON/OFF button.
Note:
·
·
Your unit has been designed to automatically output the highest level of
airflow.
·
·
The Airflow Volume Indicator Light will illuminate at the highest setting.
To adjust the airflow, and nebulizer rate
1.
Your Ultrasonic Nebulizer has 3 airflow setting: Maximuml, Medium and
Minimum.
2.
Based on instructions from your physician and/or respiratory therapist,
press the Nebulization rate control button to adjust the airflow volume.
The Airflow volume Indicator Light will show the lever (Maximal, medium
or Minimum) selected,
Fig. 5.
To begin a treatment,
1.
Follow the instructions provided by your physician
and/or respiratory therapist.
2.
Your Nebulizer is designed to start at a lower atomization
rate in the beginning and will become stronger after a
few seconds.
Remember:
·
·
Keep your eyes away from the output of medication mist.
·
·
If any discomfort or abnormality occurs, stop using the
unit immediately.
·
·
Do not tilt or shake the unit when in operation.
·
·
Opening the top cover during operation may cause a
severe injury.
To end a treatment,
1.
When the treatment has ended, press the ON/OFF button stop operation.
Turn the switch at bottom to "OFF/CHARGE" position. Otherwise, your unit
will ,automatically shut off after approximately 10 minutes of continuous
use.
2.
Unplug the adapter from the outlet and detach the adapter plug from
the unit's AC port.
F
IG
. 5
MA LT155_160 01A.qxd:Manuale Istruzione Aerosol.qxd 4-12-2008 16:16 Pagina 20
