Crossover assembly:
Point-to-point wiring diagram
14)
Arrange the components on the White Perforated Crossover Board as illustrated in the point-
to-point wiring diagram above so the leads can be connected together as shown on the back
side of the board. Take careful note of the component type and the value of the component.
(The crossover schematic is provided at the end of this assembly guide.)
15)
Connect the leads of the components as shown in the diagram by twisting them together or
creating interlocking "hooks" with the leads. Double check your layout to ensure all
components are in the proper location and connections are correct.
Note:
The component leads should be long enough to make the C1, L1, R1, C2 connection
underneath C3 to keep leads from crossing.
