Enclosure Assembly:
1)
First, before gluing anything, do a dry fit of the enclosure to familiarize yourself with the
parts and assembly. This will also give you a chance to ensure that all pieces have been cut
properly.
2)
Due the design of this enclosure, it can easily be assembled in one sitting, using as little as 6
clamps.
3)
Begin by setting the enclosure parts out on a flat level surface and ensure that all pieces are
free of dust and debris.
4)
Glue all mating surfaces of the notches in the
Horizontal Brace
and
Vertical Brace
and
assemble as shown to complete the
Brace Assembly
. Ensure that the notches are seated
completely. Light clamping pressure can be applied while preparing the next step, but should
not be necessary.
